Turbine Compressor Oil Dehydration System

It is widely suitable for online processing of steam turbine, the gas turbine, the hydraulic turbine's and compressor oil in electric power,It can remove the water, impurities and gas(acetylene, hydrogen, methane, etc), it will not change the oil components and performance.

Product Description

TY Series Vacuum Compressor Oil Purifier, Turbine Oil Water separator.

Machine color: RAL8024

Certificate: CE, UKCA availabe

Application

Compressor lube oil dehydration equipment ,hydraulic oil filtration and turbine oil purification machinery is specially designed for all kinds of lubricating oil. It is widely used in drawing machine lubricating oil, other hydraulic oil, anti-wear hydraulic oil, compressor oil, heat transfer oil, heavy-duty gear oil, refrigeration oil, turbine oil etc. it can quickly remove impurities, dust, moisture, gas, light hydrocarbon, acid value and ammonia in the oil gas, improve the quality of oil, restore the unique performance of lubricating oil.

WOEKING PRINCIPLE

The used lube oil machine oil purifier adopts vacuum separation , precise filtration, molecular adsorption, vacuum drying principle.It is one separated machine without any auxiliary machinery. Based on the principle of vacuum saturation of oil and water saturated temperature,three dimensional, multi-layer fast and efficient oil water separation technology, as well as multi-stage deep level precision filtration technology.

FEATURES

1. turbine oil and water separator completely breaking the emulsion by adopt vacuum technology, molecular absorption, vacuum drying, automatically break emulsification technology.

2.Used unique ternary once dehydration method, not only remove large amounts of water from oil, but also remove trace moisture from oil, with high efficiency of dehydration and breaking the emulsion, it can let the serious turbid emulsion oil become transparent cleaning.

3. be washed and repeatedly use, it have long life and need low cost. High-precision filter configuration can effectively remove fine particulate impurities from the oil.

4. Turbine oil and water separator have adopt low-load design in heater, ensured it can heat oil uniformly, can effectively prevent cracking and aging hazards of oil.

5.Turbine oil and water separator can unattended running with the turbine or other equipment, low noise, it correspond the high standard of world environmental protection requirements.

6. Turbine oil filter with the automatic drainage device can drain continuously, it is easy operation and hommization.

7.If oil acid value is too high, you can choice BZ regeneration device to mach HOPU TY Series turbine oil purifier, reduce the acid value and dielectric loss, after process, acid value ≤0.03(mgKOH/g), let quality indicator meet the standard of "GB / T 7596-2008" the operation of turbine oil quality standards ". it can demulsification, dehydration, remove acid and impurities online, let the turbid emulsified turbine oil become clear and transparent.

Technical data

Item	Unit	TY-10	TY-20	TY-30	TY-50	TY-100	TY-150	TY-200	TY-300
FLow rate	L/min	10	20	30	50	100	150	200	300
Vacuum degree	MPa	-0.06～–0.095
Working pressure	Mpa	≤ 0.4
Temperature degree	℃	20 ~80
Power supply		380V/50HZ/3Ph 5 wire(as customer’s requirement)
Working noise	db(A)	≤ 65~80
Working time	h	≥ 4000
Continuous working time	h	150
Electric heating degree	kw	12	15	18	24	45	60	72	84
Total electric power	kw	14	17	20	27	48	66	81	97
Outlet(inlet)caliber	mm	Φ25	Φ25	Φ25	Φ32	Φ42	Φ50	Φ50	Φ60
Weight	kg	400	450	500	600	800	1000	1100	1550
Size	L	1550	1550	1600	1650	1700	1750	1900	2000
	W	800	850	900	950	1000	1200	1300	1350
	H	1600	1650	1700	1750	1800	1800	2000	2100

Index after filtering

Index after filtering	Moisture content(PPM)	≤50
	Gas content(%)	0.1
	Demulsification value(min)	≤15
	Degree of cleanliness(NAS 1638)	4
	Impurity size(μm)	≤1(Customerizable)