OSi FLUOROSil 1313 CAS 85857-16-5

Product Description

OSi FLUOROSil 1313 CAS 85857-16-5

1H,1H,2H,2H-Perfluorooctyltriethoxysilane is a fluorine-based polymer that has a low surface free energy.

POTS can be used as a silane-based coating on poly(vinylidene fluoride) (PVDF) to synthesize a membrane for the removal of hazardous volatile organic compounds. Glass substrates can be modified with POTS to increase the contact angle for 3D reactive inkjet printing of polydimethylsiloxane (PDMS). It can also be used in the synthesis of superhydrophobic carbon nanotubes(CNT) hollow membranes for membrane desalination (MD) as eco-friendly products of fresh water. It is deposited on the roughened surface of titanium to render it superhydrophobic. POTS may be used as a component of fluorine modified ORMOCER (Organically Modified Ceramics) coating materials.

Product Description

Chemical Name: 1H,1H,2H,2H- Perfluorooctyltrimethoxysilane

CAS No.: 85857-16-5

Formula: C11H13F13O3Si

Molecular Weight: 468.28

Chemical structure:

OSi FLUOROSil 1313 CAS 85857-16-5

Typical Technical Data

The values below are not intended for use in preparing specifications. Please confirm with us prior to writing specifications on this product.

Appearance: Colorless clear liquid.

Density(ρ20, g/cm3): 1.46

Refractive Index ( ): 1.3350

Boiling Point: 88℃

Purity (by GC, %): 98.0min

1H,1H,2H,2H-Perfluorooctyltriethoxysilane Applications

Silane OSi FLUOROSil 1313 can be used as a raw material in areas of anti-reflective coating, release coating, and soil-repellent coating...

Mainly used as a surface modifier to form a transparent nano-layer film after curing, without affecting the appearance and light transmittance of the substrate;

Used for the surface treatment of inorganic materials with active groups such as hydroxyl, carboxyl and oxygen-containing groups (such as glass, ceramics), and To the comprehensive performance of waterproof, oil-proof, anti-fouling, dust-proof, moisture-proof, insulation, and anti-fingerprint.

It can also be used as an adhesion promoter between fluoropolymers and inorganic materials to increase the gap between fluoropolymers and substrates.

Specific applications include:

1. Water-repellent anti-fouling and anti-ultraviolet coating on the glass surface, such as the treatment of automobile glass;

2. Anti-oxidation on the surface of metals (copper, iron, aluminum, etc.);

3. The surface of ceramics and marble is waterproof and antifouling;

4. Waterproof, anti-fouling and anti-corrosion treatment of wood and products;

5. Finishing of natural fiber (wool, cotton, leather, etc.) products to reduce water holding capacity and improve surface hydrophobicity and stain resistance;

6. Waterproof, antifouling and weatherproof protection treatment of cultural relics and masonry;

7. Waterproof spots, white flowers and weathering treatment of concrete products;

8. Water-proof, anti-fouling and anti-halogen treatment of magnesium oxide and magnesia mineral products.

★ The Dos and Don'ts of Working with Silicone Adhesives and Sealants

How to use 1H,1H,2H,2H-Perfluorooctyltriethoxysilane:

Need to choose a suitable solvent for dilution according to the purpose, or mix some other ingredients to ensure that the molecules can penetrate to the hard, The internal structure of the porous inorganic substrate can achieve long-term protection.

1. The processed substrate (material) should be clean, dry, free of dust, oil, etc.;

2. Use suitable solvents, such as alcohols, petroleum solvents, aromatic hydrocarbons, isoparaffins or their mixtures to dilute to an ideal concentration of about 0.5-2% mass ratio, brushed or sprayed on the surface of the substrate. The prepared solution should avoid prolonged contact with air, and the container must be sealed;

3. The waterproof and antifouling test of the processed substrate (material) should be carried out after curing is complete, generally after 24 hours.

4. The formed waterproof and antifouling protective layer is completely invisible and will not cause optical damage to the substrate.

Reaction principle:

In the presence of water or moisture, the ethoxy functional group of this product will react with water and hydrolyze to form silanol groups which are highly reactive with a variety of inorganic substrates, and release ethanol as a by-product of the hydrolysis reaction; and fluorine-containing Alkyl groups can form a low surface energy coating on the surface of the material.

At the same time, this "double phobic" effect of hydrophobic and oleophobic can be obtained by many commercial fluorosurfactants and fluororesins, but the fluorosilane SCA-F13C8E has a unique advantage compared with them: it can be used in The surface of the material forms a two-dimensional and three-dimensional network structure, so it can form a coating with very stable physical and chemical properties on the surface of the material at a very low concentration. The thickness of this coating is often only a few nanometers.

Suitable materials for this product include (but are not limited to) glass, silica, quartz, mica, silica sand, standard sand, wollastonite, kaolin, talc and other substrates, fillers or fibers with silanol on the surface.

Safety & Storage

Customers should review the latest MSDS and label for product safety information, safe handling instructions, personal protective equipment if necessary, and any special storage conditions required for safety. MSDS is available at your request.
Stored in a cool, dry place. Avoid light.

Key Functions of Co-Formula Products:

Remarks

This technical data sheet is only used for internal quality control within OSi Holding Limited.

Packaging

200L PVF steel drum or on request.