Mini Tape printed machine

Our company is a leading China manufacturer, supplier and exporter.The main structural role and working principle The structure of the machine consists of discharging unwinder , corona, traction, 1st color printing, 2nd color printing, oven, slitting and receiving.

Product Description

Specifications of the mini Tape printed machine

Maximum printing length	250mm
Printing width	180mm
Printing speed	5-60m/min
Overprinting accuracy	<0.15mm
Total installed power	6Kw
Dimensions	(L×B×H)1680×780×1280
WEIGHT	≈618KG

Mini Tape printed machine: The main structural role and working principle

The structure of the machine consists of discharging unwinder , corona, traction, 1st color printing, 2nd color printing, oven, slitting and receiving.

Mini Tape printed machine: Ink supply mechanism

Lift the ink bucket.
Anilox roller.
Scraper.
Printing roller.
Backrest roller composition.

Mini Tape printed machine: Color registration mechanism

The color registration is composed of the planetary gearbox transmission mechanism, and the planetary gearbox transmission is adjusted left and right to register the pattern up and down. Adjust the printing roller left and right to register the pattern up and down.

Mini Tape printed machine: Oven mechanism

When the print passes through the oven, the heat emitted by the heating tube is blown out by the fan to dry the ink on the surface of the print. The oven temperature is controlled by a smart temperature meter and thermocouple sensing.

Mini Tape printed machine: Rewinding device

The winding device is mainly used to roll products into cylinders. He mainly has reels. The power drives the gear through the motor, and the sprocket transmits the power to the receiving shaft to rotate to achieve the purpose of winding. Drum tightening depends on nut and spring adjustment.

Mini Tape printed machine: Machine maintenance and upkeep

In order to make the printing machine work normally for a long time and print better printed matter, the machine must be well maintained, and the operator must carry out pre-job technical training, not only familiar with the flexographic printing process, but also must understand and master the structure, working principle and normal operation method of the machine. It is necessary to grasp the essentials of the adjustment of various institutions. Before start-up, it is necessary to fully check the condition and operability of all parts of the machine, flexibility, must add lubricating grease to each lubrication part, the police should check the running parts during the operation of the machine, if there is abnormal bearing noise, vibration and other abnormal conditions, should be stopped immediately for inspection, and can be turned on only after solving the problem. After stopping, it is necessary to immediately pull the brake and power off, clean the machine, talk about the ink bucket, loosen the glue roller, exit the ink knife, and scrub the plate roller and ink blade with cleaning agent, and fill oil at each lubrication point.

Mini Tape printed machine: Electrical control system

This machine adopts 2 220V/50Hz AC power supplies. The control system adopts 220V alternating current. For specific electrical switches and meters, see the machine operation panel. After the machine is installed, start the main motor, adjust the speed, make the main machine rotate slowly, and check the direction of rotation of the main engine.

The machine housing must be reliably grounded. Pay attention to electricity safety.