Home > Chemicals
CAS1379686-30-2 SR9009, Great quality
CAS1379686-30-2 SR9009, Great quality

SR9009, a REV-ERBα/β agonist, inhibited the IC50 of REV-ERBα and REV-ERBβ at 670 nM and 800 nM, respectively. CAS number 1379686-30-2 Molecular weight 437.94000 Density 1.3± 0.1g /cm3 Boiling point 547.2±45.0 °C at 760 mmHg Molecular formula C20H24ClN3O4S Flash point 284.7±28.7 °C

CAS159752-10-0, MK677 Ibutamoren Mesylate
CAS159752-10-0, MK677 Ibutamoren Mesylate

Ibutamoren Mesylate is a potent, non-peptide-like growth hormone secretin receptor (GHSR) agonist. CAS number 159752-10-0 Molecular weight 624.769 Boiling point 868.9ºC at 760 mmHg Molecular formula C28H40N4O8S2 Flash point 479.3ºC

CAS328947-93-9, LGD-2226, High quality
CAS328947-93-9, LGD-2226, High quality

LGD-2226 is a selective and orally active androgen receptor (AR) modulator with an EC50 of 0.2 nM and a Ki of 1.5 nM for human androgen receptors. LGD-2226 shows tissue selectivity in animal models and has a low effect on the prostate compared to muscle. LGD-2226 can be used in the study of muscle atrophy, osteoporosis and sexual dysfunction.

CAS917891-35-1, LGD-3303
CAS917891-35-1, LGD-3303

LGD-3303 is a selective androgen receptor modulator (SARM). CAS number 917891-35-1 Molecular weight 342.74300 Molecular formula C16H14ClF3N2O

CAS1165910-22-4, LGD-4033, factory supply
CAS1165910-22-4, LGD-4033, factory supply

LGD-4033 is a novel non-steroid, oral SARM with high affinity (Ki at 1 nM) and selective binding to androgen receptors. CAS NO.1165910-22-4; Molecular weight 338.248 Density 1.5± 0.1g /cm3 Boiling point 439.9±45.0 °C at 760 mmHg Molecular formula C14H12F6N2O Flash point 219.8±28.7 °C

CAS 1010396-29-8, S-23
CAS 1010396-29-8, S-23

S23 is a novel Selective Androgen Receptor Modulator(SARM). CAS NO1010396-29-8 Molecular weight 416.75400, Molecular formula C18H13ClF4N2O3.

CAS 401900-40-1, S-4(Andarine)
CAS 401900-40-1, S-4(Andarine)

Andarine (S-4) is a selective androgen receptor modulator (SARM) or a partial agonist. CAS number 401900-40-1 ; Molecular weight 441.358 Density 1.5± 0.1g /cm3; Boiling point 698.7±55.0 °C at 760 mmHg Molecular formula C19H18F3N3O6; melting point of 70-74ºC Flash point 376.4±31.5 °C The symbol GHS07 GHS07 Signal word Warning

FJPC-P1 Polycarboxylate Superplasticizer（Powder）
FJPC-P1 Polycarboxylate Superplasticizer（Powder）

This product is a special high-performance water reducing agent based on polycarboxylic acid ether (PCE), a powder polycarboxylic acid water reducing agent prepared by a special spray drying process

2,6-Difluorobenzenesulfonyl chloride
2,6-Difluorobenzenesulfonyl chloride

Appearance: colorless liquid Boiling point: 210 °C (lit.) Relative density (water = 1): 1.568 g/mL at 25 °C (lit.) Assay: ≥98% Uses: used as intermediates in pharmaceutical chemistry and organic synthesis, often reacted with hydroxyl groups to generate corresponding sulfonate ester products.

Cyclobutyl bromide 4399-47-7
Cyclobutyl bromide 4399-47-7

Appearance: colorless liquid Boiling point: 108°C (lit.) Relative density (water = 1): 1.434g/mLat 25°C (lit.) Solubility: insoluble in water. Assay: ≥97% Uses: pharmaceutical intermediates; Used as a 5'-hydroxyl protective group of nucleosides; peptide synthesis protection reagent.

Cyclobutanone 1191-95-3
Cyclobutanone 1191-95-3

Uses: It is the starting substance for the synthesis of 1-aminocyclobutanecarboxylic acid. The solvent of water-based ink is generally deionized water as the main solvent, and then an appropriate amount of organic solvent (cyclobutanone) is added.; Initiating substance for the synthesis of 1-aminocyclobutanecarboxylic acid.

Potassium bis(trimethylsilyl)amide 40949-94-8
Potassium bis(trimethylsilyl)amide 40949-94-8

Appearance: colorless to light yellow liquid Melting point: 194-195 °c Boiling point: 111 °C Relative density (water = 1): 0.877g/mLat 25°C Assay: ≥98% Uses: pharmaceutical intermediates, mainly used in the production of synthetic cephalosporin antibiotics

Lithium diisopropylamide 4111-54-0
Lithium diisopropylamide 4111-54-0

Uses: 1. Diisopropyl lithium amide is widely used in metallized alkaline reagents, and also used in non-nucleophilic strong base reagents with large steric hindrance 2. The very famous large barrier base is used to form carbonegative ions. Lithium diisopropylamide is widely used in metallized alkaline reagents, and also used in non-nucleophilic strong base reagents with large steric hindrance

Sodium bis(trimethylsilyl)amide 1070-89-9
Sodium bis(trimethylsilyl)amide 1070-89-9

Appearance: slightly yellow to light gray crystalline powder, the solution is colorless to light yellow liquid Melting Point: 171-175 °C (lit.) Boiling point: 67°C Relative density (water = 1): 0.904g/mLat 25°C Solubility: reacts with water, soluble in aromatic hydrocarbons and ethers Assay: ≥98% Uses: Non-nucleophilic strong base

Lithium bis(trimethylsilyl)amide 4039-32-1
Lithium bis(trimethylsilyl)amide 4039-32-1

Appearance: white solid Melting point: 73 °c Boiling point: 55-56°C Relative density (water = 1): 0.860 g/mL at 25 °C (lit.) Assay: ≥98% Uses: for aldehyde alcohol condensation, is a commonly used organic base.

Hexamethyldisilazane 999-97-3
Hexamethyldisilazane 999-97-3

Appearance: colorless liquid Melting point: -78°c Boiling point: 125°C Relative density (water = 1): 0.765 Solubility: soluble in organic solvents, contact with air will be rapidly hydrolyzed to generate trimethicanol and hexamethyldisil ether Assay: ≥98% Uses: Amikacin pharmaceutical intermediate, hydroxyl and amino protective agent; Specialty organic synthesis.

Previous12...12131415161718...3940Next

Related Search

Rubber Stainless Steel Waterer Fresh Feng Shui Pear Ytterbium Fluoride Evaporation Materials, YbF3 Hafnium(IV) Oxide Evaporation Materials, HfO2 Zirconium Dioxide Evaporation Materials, ZrO2 Germanium Sputtering Target, Ge Hafnium Sputtering Target, Hf Customized Cylinders Sweeper Supporting Cylinder Sanitation Equipment Type Supporting Cylinder

CATEGORIES

Home Contact us

Sign In

Username :

Password :